Generator Set Controller Automatic Genset Control Module with Mains Failure Self-start Function RS485 Interface Waterproof Level IP65 for Single Generator Set Automation and Monitoring System

"Generator Set Controller Automatic Genset Control Module with Mains Failure Self-start Function RS485 Interface Waterproof Level IP65 for Single Generator Set Automation and Monitoring SystemMain characteristics♦ 132x64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;♦ Acrylic screen, improved wearable and scratch resistance property;♦ Silica-gel panel and keys can well adapt to higher and lower temperature;♦ RS485 communication port enables “three remote” functions via MODBUS protocol;♦ CANBUS port which can be connected to ECU with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port;♦ Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz system;♦ Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;♦ For mains, genset has functions of over/under voltage and loss of phase; For gens, genset has functions of over/under voltage, over/under frequency, over current and over power;♦ Control and protection function: Automatic start/stop of genset, load transfer (ATS control) and perfect fault display and protection;♦ With ETS, idle control, pre-heat control, speed raise/drop control, all of them are relay outputs;♦ Power supply range: (8~35)VDC, accommodating to different starting battery voltage environment;♦ Event log, real-time clock, scheduled start & stop function (can be set as start unit once a day/week/month whether with load or not);♦ Add rubber gasket between shell and controller screen, the waterproof can reach IP65.

• The series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset.
• It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote” (remote control, remote measure and remote communication).
• The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.
• The series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc..
• All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC.